Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Know of any windows based programs to convert SCO-ASCI to windows ASCI
- Thread starter SCOASCI
- Start date
ASCII is ASCII. If what you want to do is transfer from one to the other you would be better using doscp on the unix side, it puts the carriage returns/linefeeds so dos (windows) can use the data.
At least this is what I read between the lines in your post. [sig]<p>Ed Fair<br><a href=mailto: efair@atlnet.com> efair@atlnet.com</a><br><a href= > </a><br>Any advice I give is my best judgement based on my interpretation of the facts you supply. <br>
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.<br>
[/sig]
At least this is what I read between the lines in your post. [sig]<p>Ed Fair<br><a href=mailto: efair@atlnet.com> efair@atlnet.com</a><br><a href= > </a><br>Any advice I give is my best judgement based on my interpretation of the facts you supply. <br>
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.<br>
[/sig]
If you are using os5 or unixware mtools binaries are much better that the dos... binaries. They are available from the sco web site and are also included on the Skunkware disk now shipped with a new installation media set.
Roy Thomas
[sig][/sig]
Roy Thomas
[sig][/sig]
- Status
Similar threads
- Locked
- Question