I have a USB to serial port adapter connected to my Windows 7 OS laptop, connected to a keri PXL 500 Controller board through the TB12 connector. The pin-out is TB12 pins 1,2, and 6 connected to a DB9 connector pins 2, 3, and 5 respectively. To reiterate from the TB12 to the DB9, Pin connections are; 1 to 2, 2 to 3, and 6 to 5.
The Doors program is not seeing the controller. Any help and suggestions would be appreciated.
Thanks.
The Doors program is not seeing the controller. Any help and suggestions would be appreciated.
Thanks.