Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KDS system 1

Status
Not open for further replies.

mxap

Vendor
May 11, 2005
197
US
I setup a KDS system with micros RES 3700 , 5.1.
First day, when I set it up, it worked fine.
It stopped working next day.It now has white screen.
I see that the Right bottom corner there are two PC icons and HOUR glass between. That tells me that there is some issue with connection.
I can reboot the KDS system from the control panel fine.
Micros sevrer verison is 5.1.
Below is my MDSHosts file for the KDS.
What is <KDSSeq>113</KDSSeq>??


<MachineName>KDS</MachineName>
<IPAddress>192.168.100.107</IPAddress>
<NetMask>255.255.255.0</NetMask>
<LanNodeSeq>13</LanNodeSeq>
<LanNodeObjNum>8</LanNodeObjNum>
<WorkstationType>P</WorkstationType>
<UwsSeq>NULL</UwsSeq>
<MBSeq>NULL</MBSeq>
<KDSSeq>113</KDSSeq>
<OCBSeq>NULL</OCBSeq>
<IsServer>F</IsServer>
<IsBackupServer>F</IsBackupServer>
<IsKDSServer>F</IsKDSServer>
</NODE>

thank you all.
 
On KDS PC, when I try to run McrsCAL Config command to check and make sure that it is configured with micros server, nothing happens.
thanks
 
Make sure the KDS service is running on the Micros server.
 
I saw the service Called "MICROS KDS Controller" which has not started and set as Automatic, is that the one?
thanks
 
pmegan,
Thanks a lot.
It worked.
Not sure why it did not start in first place.
thanks again.
mxarun
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top