Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

K7VM2 - Main Memory

Status
Not open for further replies.

darkali

Programmer
Sep 28, 2003
3
BR
When I turn on my PC I hear 3 beeps; the manual pages
says that this is due to main memory.
What should I do?
Will I have to change the memory modules?
I think my memory module is DDR 2700.
Please help me!
Thanks in advance!
 
Try just removing and refitting your memory module, often they don't make proper contact and such faults occur.
The memory modules is usually positioned towards the top rear edge of the motherboard, make sure you refit the correct way around (cut out in the strip of terminals) "KEY"
If you still have no joy then fit the module in a differant slot.
Martin

Replying helps further our knowledge, without comment leaves us wondering.
 
Pretty sure that mobo won't run higher than pc2100.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top