Jitter Buffer

[Redlabel]

Hi!
Can anybody help me? We have just set up a MD110 with IP telephones. After just one day of use the whole system shut down. The error message was "Jitter Buffer Owerflow"
The recomended size for this buffer is 70 ms and that's what we set it to. What should I do?
Thanks!

Eirik

 

[lalrl]

Which SP (cadap, must be SP10), which Board? (must be ELU32 Rof../1), which firmware on ELU32 (cnbip, must be R7), which phones? if DBC3213 press c*4 together until display tells you firmware and bootprom (left must be R6 right R4).

 

[Redlabel]

Hello!
Here are the specs.:

Which SP (cadap, must be SP10),
[Per-Arne Allertsen] SP 10



which Board? (must be ELU32 Rof../1),
[Per-Arne Allertsen] 001-0-32 ELU32 ROF1375428/1



which firmware on ELU32 (cnbip, must be R7),
[Per-Arne Allertsen] R1A CAA 158 0016 R6A EXE

I have have just uppgradet ELU 32 Board too R6A, when do R7 come on the marked?



which phones? if DBC3213 press c*4 together until display tells you firmware and bootprom (left must be R6 right R4).
[Per-Arne Allertsen] R6 Left R4 Right, We use DBC3413. IP-phones.

 

[lalrl]

...yes of course: DBC3413. When came the new firmware? Do not wonder. The meantime between Servicepacks, Hotfixes, and Firmware from Ericsson will be shorter and shorter. I´m also convinced, they design a new IP-Board at the moment. Give me your E-Mail and I will send you the new firmware, maybe it works. For us it was a big improvement.

 

[Redlabel]

Hello!
Can you send it to me?
Did you find the firmware at Ericsson's Info channel?


eirik.nergaard@tos.bravida.no

Thanks