Jetdirect and PIX VPN

[gardnepw]

I have a vpn setup between to remote sites, all works fine except setting up the jetdirect. The host site has a terminal server, the server is only able to ping the private address of the remote site that has the jetdirect installed. Any suggestions I have not been able to find any information on this problem.

 

[routerman]

Installations I have worked on using Jet direct required TCP port 9100 opening up, are you blocking this port?

 

[gardnepw]

I have applied and access-list to allow the IP segments of each network to pass.
access-list 101 permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
crypto map transam 1 match address 101

I have also noticed that telnet or html access to the jetdirect form the outside network is not possible, only pinging.
I will add another access-list to allow all traffic from the trusted networks.

Thanks

 

[gardnepw]

Problem was found to be a typo in the LAT on the SBS, all is working well now. Thanks for the replys.