Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

J1XX series phones not failing over

Status
Not open for further replies.

BResource

Programmer
Apr 22, 2008
160
GB
Hi All,

I have two IPO 500s with J series phones. They are connected via VPN in an SCN.

Everything works fine but the J series phones don't failover.

I have set this up before on a server edition and it works fine.

FQDNS and domains are set and DNS is setup at each location and tested.
I can see the FQDNs of both sites in each system's 46xxsettings.txt file.
SCN line is set to failover.

When I turn off system 1 I can see registration attempts from the phones but system 2 doesn't respond to them.

Systems are 11.1.

Really odd! Am I missing something for non SE systems?

Many thanks in advance!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top