J169 as a remote phone

[t3rm3y]

Does anyone know the ports to be forwarded for a j169 to be used at a remote location without vpn please?

 

[Okkie26]

It's a SIP phone.

Port 5060.

But....


DON'T DO IT WITHOUT VPN!!!!!

 

[gwebster]

Use an SBC.

 

[derfloh]

5061 (or an individual SIP TLS port)
443
411
UDP ports for SDP.

SBC is highly recommended.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[t3rm3y]

There is no SBC on this, it is just a IPO V2 on a customers network, its only on the network as they want a remote user. Ill speak to them about a VPN
so is it SIP 5060 or 5061?

 

[t3rm3y]

Handset is a J139 - but i assume its the same principle.?

 

[Okkie26]

Yes the same. But as mentioned. Just DONT do it without VPN..

You're the one to blame in case they got hacked.