J129 Bridge Appearances - Not Working

[grosenbe]

Server Editon Ip Office with J129 and J169 phones. If I try to program a J129 extension on a J169 phone as a bridged appearance nothing happens on J169 phone when you call the J129 extension. If you create a bridged appearance from a J169 phone on another J169 phone that works. J129 software is 3.0.0.1.6 and J169 is 3.0.0.1.6. All phones are SIP. Did work at one point but can find anything that changed.

 

[sizbut]

The J129 doesn't support appearance buttons.

Stuck in a never ending cycle of file copying.

 

[grosenbe]

The appearance button is on the J169. The admin at the J169 is monitoring the J129 extension

 

[derfloh]

But a bridged appearance is kind like of a Copy of a call appearance on another phone.

So if J129 don't support call appearance, you can't place a bridged appearance on the J169

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[sizbut]

No its not. A bridged appearance on phone A mirrors a call appearance on phone B. If phone B doesn't support appearance buttons (of any kind) then bridged appearances to it don't work.

Stuck in a never ending cycle of file copying.