I am trying to set up a cordless single line phone on an Iwatsu Adix system. I have the system setup with an 8 port analog card. The phone works fine as an extension but I cannot get it to access an outside line. I have researched and have not been able to find anything. Any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Iwatsu Adix Single Line Phone
- Thread starter Hannah55
- Start date
curlycord
Programmer
Did you try dialing 9?
I dont know the system but if it helps... first you would need to put line/trunks into a pool/group then program an access code for it then allow the set to have access to that code.
________________________________________
Add me to LinkedIN
**New Allworx Forum**
=----(((((((((()----=
Toronto, CAN
I dont know the system but if it helps... first you would need to put line/trunks into a pool/group then program an access code for it then allow the set to have access to that code.
________________________________________
Add me to LinkedIN
**New Allworx Forum**
=----(((((((((()----=
Toronto, CAN
- Status
Similar threads
- Locked
- Question
