Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Iwatsu Adix Physical Port

Status
Not open for further replies.

whitera6911

IS-IT--Management
May 7, 2004
18
US
Is there a feature code I can use to have a teleset display what physical port it is connected to?

I'm trying to document how the stations are punched down and according to the station report, the physical ports are not in sequence on the block.

I just want to confirm what the station report is telling me.
 
Feature #9 will show you the logical port. The display will show ext XX and the extension number.The logical port may or may not be the physical port. Usually in older systems like the Adix 100, the ports will match but in an M or APS they can be built any way you want. The only way to tell is do a report and look at class 1 or in the windows program do a station configuration report. It can be confusing.
 
Thanks, Perhaps that feature code is not programmed into the system. I press the feature key followed by # followed by 9 and nothing happens. I sure with Iwatsu would publish the admin manual on the net like other PBX companies.
 
In fonedude's defense, the Feature # 9 will do a button inspect. Iwatsu is very proprietary and not prone to making any of their manuals and tech bulletins available to anyone other than authorized resellers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top