IWatsu ADIX IX-CML Down

[mbaker6706]

Hello, I'm in need of some PBX help for the model noted in the subject. I've got tone all the way up to the PBX but the phones in my office are not displaying any data. I'm by no means a PBX guy so I'm reaching out for any help I can find before Monday when my office opens up again. A little background on how I got here:

Today, our office had some insulation blown into the walls. During the process, a flashlight fell through my server room ceiling and hit a power brick that turned off the PBX. Upon turning the power brick back on the PBX came back on but nothing is being sent out to my phones. I've tried rebooting the PBX and my T1 lines in different orders but nothing seems to be working.

So I'm not exactly sure what else I need to be looking for from the PBX perspective. I'm curious if anyone has some more ideas to help me troubleshoot this issue.

Michael

 

[norstarboy125]

Calling a local vendor would be a smart thing to do.

Charm City Communications

http://www.charmcitycommunications.com

 

[fonedude]

The power supply either has 1 or 2 Green LEDs. There are fuses below the LEDs but I have rarely seen them Pop. There is a card in the cabinet with Red tabs on the top and bottom, Toward the top is a bank of about 6 LEDs which show the state of the CPU. There should be 1 on the top and 1 toward the bottom that flickers. If there is only 1 green LED flashing toward the back of the card. The CPU has defaulted. Power down. Reseat all the cards. Power up. Report light status.