Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Iwatsu Adix IP Segway programming
- Thread starter matt95gsr
- Start date
Go to the command line interface. Type "show" then press enter.
This will show the current configuration.
Type "ip" a space, then the ip address press enter.
The read out should say "TCP/IP address OK"
The other CLI commands are "netmask and gateway"
Type "keep" when finished.
Then cycle the power to the box. Hook up again and type "show" to see if the changes took.
If you need more info let me know. If you can get ane-mail address to me I'll forward the bulletin. EBA 2002-03
This will show the current configuration.
Type "ip" a space, then the ip address press enter.
The read out should say "TCP/IP address OK"
The other CLI commands are "netmask and gateway"
Type "keep" when finished.
Then cycle the power to the box. Hook up again and type "show" to see if the changes took.
If you need more info let me know. If you can get ane-mail address to me I'll forward the bulletin. EBA 2002-03
- Status
Similar threads
- Locked
- Question
