ivs2 (ics120) Outbound CLI

[Roo Richards]

trying to get outbound calls to present extn level CLI/CND on an ISDN trunk. already working for other extensions

ISUBN is set to x725 and CLIR is 1 - same for the extension that is sending CLI/CND

am I missing something?

checked through cmd 12 & 13 and cant see anything else

 

[Billz66]

1212 per ext set ext
1213 per ext set pattern
5005 pattern set prefix

eg if number was 0881234001 and ext was 4001

1212>4001:4001
1213>4001:00
5005>00:088123


If I never did anything I'd never done before , I'd never do anything.....

 

[OzzieGeorge]

I will take a guess that you are in Australia as you call it an ICS120 (note in the USA the ICS 120 was the IVS, both the US and Australia had the IVS2). Anyway my point here is that in Oz, you would drop the preceding 0 in Cmd 5005. So in Billz66's example above Cmd 5005 would read 5005>00:88123 In Oz, if you send out the wrong information,the carrier will just substitute the LDN (main number). not sure if this is the same in the US!

 

[Roo Richards]

Billz66 thanks, it was 1213 that was the clincher it was set at default 15

Roo