ITSP Templates

[telcodog]

Anybody know where to go to get the ITSP templates that the manual tells you to import. I'm using the Avaya BCM50 and 450 SIP trunking guides. I do what it says to import them but I have no idea where to browse to and the manual doesn't specify. I want to download the MTS Allstream template.

Thanks.

 

[curlycord]

Good question, have not found much of any info on this.
I would have thought the SIP provider would have them....just not the 4 providers I dealt with which has cost me a lot of hours last week.

I did however find one inside some PDF on the net from AT&T
If you see one you can open them with notepad
The extensions is .sipt

Here 2 of the AT&T one if you want to play with the settings/names, was the only ones I found:



This one is No Media Relay and the of file is ATT_IPFR_NOMEDIARELAY_GA_v1.sipt:

##########################################################################
##
## Name: ATT_IPFR_NOMEDIARELAY
##
## Template Builder Version: 1
## Date Created:10/26/2010
##
##
##
##
##
##
##
##
$START
Name:ATT_IPFR_NOMEDIARELAY
Description:AT&T IP Flexible Reach (No Media Relay)
ItspDomainOrIpAddr:<ChangeMeToTheATTIPBEAddress>
LocalDomainOrIpAddr:
ProxyFqdnOrIpAddr:
ProxyPort:5060
AllowRefer:0
RegistrarAddr:
RegistrarPort:5060
EnableMaddrInRUri:0
EnableMaddrInContact:0
EnableUserEqPhone:0
ForceE164Int:0
SessionRefreshMethod:0
SessionMinSE:90
SessionExpires:1800
SessionRefresherRemote:0
AuthRealm:
EnableNat:0
EnableMediaRelay:0
SipKeepaliveMethod:0
SipKeepaliveInterval:30
Support100rel:0
SdpAllowUpdate:0
SdpEnableOptionsQuery:0
SdpUseNullIpToHold:1
ItspAssocMethod:3
SupportReplaces:0
RegistrationRequired:0
Comment:AT&T IP Flexible Reach SIP service. Media Relay feature is disabled. \n\n"ChangeMe" placeholder is used for Remote SIP Domain. When adding ITSP accounts on the BCM Element Manager, be sure to enter the correct AT&T IPBE address provided by AT&T Customer Care.
SipStandardCapsEnabled:0
$END



This one is Media Relay and the of file is ATT_IPFR_MEDIARELAY_GA_v1.sipt:


##########################################################################
##
## Name: ATT_IPFR_MEDIARELAY
##
## Template Builder Version: 1
## Date Created:10/26/2010
##
##
##
##
##
##
##
##
$START
Name:ATT_IPFR_MEDIARELAY
Description:AT&T IP Flexible Reach (Media Relay)
ItspDomainOrIpAddr:<ChangeMeToTheATTIPBEAddress>
LocalDomainOrIpAddr:
ProxyFqdnOrIpAddr:
ProxyPort:5060
AllowRefer:0
RegistrarAddr:
RegistrarPort:5060
EnableMaddrInRUri:0
EnableMaddrInContact:0
EnableUserEqPhone:0
ForceE164Int:0
SessionRefreshMethod:0
SessionMinSE:90
SessionExpires:1800
SessionRefresherRemote:0
AuthRealm:
EnableNat:0
EnableMediaRelay:1
SipKeepaliveMethod:0
SipKeepaliveInterval:30
Support100rel:0
SdpAllowUpdate:0
SdpEnableOptionsQuery:0
SdpUseNullIpToHold:1
ItspAssocMethod:3
SupportReplaces:0
RegistrationRequired:0
Comment:AT&T IP Flexible Reach SIP service. Media Relay feature is enabled. \n\n"ChangeMe" placeholder is used for Remote SIP Domain. When adding ITSP accounts on the BCM Element Manager, be sure to enter the correct AT&T IPBE address provided by AT&T Customer Care.
SipStandardCapsEnabled:0
$END































































































































=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[telcodog]

Well, it's a start! A lot better than what I have right now.

Thanks.