ITSP - SIP Trunks on R5

[Khosher]

Hi Guys,

I have some ITSP SIP trunks connected to BCM50 R5. All is working fine except it takes a long time for the call to establish, sometimes up to 8 seconds. I have tested the ITSP using a SIP handset directly and I get out in 3-4 seconds. So I am working under the premise it's the BCM causing the lag in time.

Has anyone experienced this or got a workaround.

Qny thoughts are greatly appreciated.

 

[Khosher]

No takers ?

 

[oldestgeek]

Khosher, try setting on of the SIP keepalives options in your IP trunk setup. As a test try hitting the # after you finish dialing to see if that speeds it up.