Could someone explain to me how the QoS probe works for ITG Trunk? I know that I experienced packet loss. Then the problem cleared up, but does this indicate a 20% loss over some period of time in packets transmitted from site A to site B? Any help is appreciated.
Site A
07:05:16 ITG203
Codec: G711Alaw
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Codec: G711Ulaw
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Codec: G729A
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Site B
07:05:18 ITG203
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor
Codec: G711Ulaw
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor
Codec: G729A
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor
Site A
07:05:16 ITG203
Codec: G711Alaw
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Codec: G711Ulaw
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Codec: G729A
Tx: 20.00 102ms Poor Rx: 0.00 103ms Excellent
Site B
07:05:18 ITG203
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor
Codec: G711Ulaw
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor
Codec: G729A
Tx: 0.00 93ms Excellent Rx: 20.00 93ms Poor