itg trunk on large system

[ipeology]

i cannot configure itg trunk on a Opt 81C with succession 3.0 software, has an SCH5787 error message.

LD 14
req NEW
type TIE
tn 4 0 7 0
des TESTING
xtrk ITG1 or ITG2

SCH5787

 

[janaya]

There are patches that are needed for ITG-Trunking and Succession. Contact ETAS and they will get them to you.

All other IP functions should work fine.

John

 

[PERRYPJ]

YOUR TRYING TO PUT IT ON A PHYSICAL LOOP YOU NEED TO BUILD A VIRUTAL LOOP IN LD 17

OLD ROLMEN WORKING ON NORTELS

 

[ipeology]

already have solution:

ld 14
req NEW
type IPTI (instead of TIE)
tn lcsu
des TEST
xtrk MC32 (instead of ITG1/2)

use this when configuring IP trunk on Succession 3.0 software. cheers.

 

[janaya]

You should still check for IP trunking patches for Succession. I know they are out there.

John

 

[ipeology]

i have requested nortel for that patches. thanks john.