ITG to ITG calling

[dpa1]

We have several offices connected to each other but from 1 location we see the the HLOC+Ext (ie. 70+2622) and from other locations we see H+Ext. (ie. H4145) in our displays.

Which setting do I have to change to make all locations show there HLOC+ext or better 6+HLOC+ext.

This is what we see from 1 location:

PROGRESS: ORIG ADDR IS NOT ISDN
CALLING #:702622 NUM PLAN: PRIVATE
CALLED #:218888 NUM PLAN: PRIVATE

This from the other locations:

PROGRESS: ORIG ADDR IS NOT ISDN
CALLING #:4145 NUM PLAN: PRIVATE
CALLED #:218888 NUM PLAN: PRIVATE

This is what we want:


CALLING #:6 HLOC 2622 So the display will show 6 70 2622

This way we can use our callers list to dial. We use 6 to access our ITG trunks and we have a 4 digit dial plan on each location

Regards,
Danny

 

[SL1User]

Assuming that you use AC1 + Loc + ext you have to set up the clid entrys in the CDB of the originating nodes.
So for you example the origin side should be set up like this.

CUST 0
SIZE 256
RNGE

INTL

ENTRY 0
HNTN
HLCL
DIDN YES
HLOC 670
LSC
CLASS_FMT DN

Do these different sides have all the same rls.?

 

[dpa1]

Thanks for this simple but very usefull solution.

It works

 

[SL1User]

No big deal, by the way this is no typical ITG problem but a general mcdn problem.