ITG Line Card 3.0 in opt11c 2

[jdoebling]

We are trying to install an ITG line side card version 3 in our opt11c. We created a virtual superloop but dont know how to assign it to the ITG Card.

 

[rtycka]

NTP 553-3001-204

LD 117 configure IP address and zones
LD 14 configure ITG physical TNs TYPE TIE
LD 97 virtual SUPL
LD 11 IP phones

good luck

 

[unkalary]

You dont assign the Virtual Loop to a ITG Line card. When you try to bring up a phone on the card, it will ask you for the NODE and TN number. The TN number you put in will be the virtual phone you programed on the VL.

When you plug the phone in for the first time, it will ask you for a number of items. Node IP and port are the first to be ask for. Make sure you put the port number as 4100. It will show you something else but change it to 4100. It wont work otherwise.