I have lost my ITG card password,can any one tell me how to reset ITG card configuration to default.Actually I have to change the IP address of ELAN & TLAN,but I am not able to login to ITG card.
553-3001-365 Standard 1.00 October 2003
Resetting the user name and password to default
1 Connect a terminal to the Maintenance port (labeled Maint). The terminal communication parameters
must be as follows:
• 9600bp
• 8 data bits
• no parity
• 1 stop bit
2 Press the Enter key on the keyboard. The IPL> prompt is displayed.
3 Reboot the card by pressing the RESET button on the faceplate of the
card with a pointed object, such as a ball-point pen.
4 Start up messages are displayed on the terminal. Type jkl on the terminal
keyboard when the prompt is displayed.
Note: jkl runs from BIOS or boot ROM which is printed early in the
bootup process. There is only a six second window at the prompt to enter
jkl. If the prompt is missed, restart the card and repeat the above step.
5 Once the card has booted from BIOS or boot ROM, a CLI prompt such as
the BIOS> appears. Enter the following command:
shellPasswordNvramClear at the prompt.
6 Type reboot at the prompt to reboot the card.
7 Wait for the card to completely reboot into the IP Line 3.1 application.
The password synchronization feature changes the password on the card
automatically.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.