Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

issue with snmpwalk

Status
Not open for further replies.

FFedo

Technical User
Sep 17, 2014
1
CH
Hi,

I have a strange issue with snmwpalk.
If I do snmpget on xxx.977.4.3.1.3.1006 I get the following successfull output :

[pre]xxx.977.4.3.1.3.1006 = INTEGER: 206[/pre]

This is what I was excepting for, now I want to look for other snmp addresses Under xxx.977.4.3.1.3.xxxx.

If I do snmpwalk on xxx.977.4.3.1.3 I get the following output :

[pre]xxx.977.4.3.1.3 = INTEGER: 0[/pre]

But I am clearly excepting to walk through all snmp adresses possible for 3.xxxx ...

What is even stranger is this
If I do snmpwalk xxx.977.4.3.1 I get the following output :

[pre]xxx.977.4.3.1 = No Such Object available on this agent at this OID[/pre]

But I am crearly excepting to walk through all snmp adresses possible for 3.1.1.xxxx, 3.1.2.xxxx, 3.1.3.xxxx, 3.1.4.xxxx [...], 3.1.9.xxxx

And If I do snmpwalk on xxx.977 it successfully go through all snmp addresses except xxx.977.4 !
How can snmpwalk go through all adresses except xxx.977.4 despite xxx.977.4 is clearly working (see first command) and this is excacly where I need to look ...

Either I do not anderstand how snmp works or I am doing something wrong.

Thank you in advance if you could help me with this.
FFedo
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top