ISDN wows! 1

[abovebrd]

ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0xB2
Cause i = 0x82D8 - Incompatible destination
Signal i = 0x03 - Network congestion tone on

Can some one help me shead some light on this debug statement. (debug isdn q931)

I am tring to config ddr via bri0.
I am able to get the remote router2 to dial into into router1 via ISDN ddr. However router1 is having some trouble reaching router2.

sho dialer relfects failed attempts.

any ideas

-Danny

 

[jeter]

check out this web site, I hope it helps you out.

http://cisco.google.com/cisco?clien...:+RX+&lt;-++RELEASE_COMP+pd+=+8++callref+=+0x

Jeter@LasVegas.com
J.Fisher CCNA

 

[abovebrd]

It turns out my local ISDN line did not have a long distance provider setup. I called pac-bell, they added, now it works !

I tested this theroy by adding long distance code to my ISDN number 1010222 (MCI)

Thanks for the above link, it was useful



-Danny