isdn support on 2811 router

[rajbjs77]

Hi,

I have a 2811 router with 1 port channelized t1 or Ei /pri port with ios c2800nm-advipservicesk9-mz.123-8.T11
I want to configure isdn on this but not getting the isdn command on this router.

Is there something wrong with the hardware or ios version.
Please suggest

Raj

 

[artaahouraei]

hi
Router 2811 doesn't recognize e1 ports by default you should add this command in configur terminal : card type e1 1
and then you will be able to config your e1 ports.
i hope your problem will be solved by this command

 

[gwildfire]

also for e1/t1 cards

Router# configure terminal

Router(config)# controller e1 ?

<0-3> Controller unit number

Router(config)# controller e1 0

Router(config-controller)# framing

Router(config-controller)# linecode

Router(config-controller)# clock source line primary

Router(config-controller)# pri-group timeslots 1-30

Router(config-controller)#

 

[rajbjs77]

thanks i got the same solution from the cisco site also.

thanks for the info.