ISDN ROUTE - MD110 BC8.1 X IP600

[MD6]

Hi all,

I need configure Route ISDN 30B+D with TLU76/1(ERICSSON) and IP600 (AVAYA). This route is Q-SIG, but only voice calls is ok. The Call-Back,Follow-me and Name Extension is not OK.

Please send me commands:RODAP,ROCAP and RODDP.

Thanks,

 

[neryga]

Please send me tour RODDP, ROCAP, RODAP, MAYBE I CAN HELP YOU.
It's a route ISDN that I have, please take care with ADC bit # 5 MUST BTO BE IN 1.

RODAP:ROU=1;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000310 H'15400000 H'06400000 NO
END

<ROCAP:ROU=1;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 011000010000001 5 2110000000 0 30 128 03151515 311110000031 111100
END

<RODDPEST=1212;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
1212 1 2606100000000250006 0 1 0

END

AGAIN ADC bit # 5 MUST BTO BE IN 1.


GOOD LOOK

 

[MD6]

Hi,

My version is BC8.1. And the your exemple is newest Version.

The BC 8.1 is good for Q-SIG?

Thanks

 

[MD6]

Hi,

See command:

RODAP:ROU=2;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
2 SL60 H'00000300 H'15400000 H'06300000 NO
END

<ROCAP:ROU=2;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
2 712000010000 5 0110000000 0 30 128 00151515 311100000031 111100
END

<RODDPEST=1212;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
17 2 1606100000000250 0 1 0

Thanks