Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

isdn pri facility information element

Status
Not open for further replies.

isdnguy

Programmer
Jun 3, 2004
1
US
hi,
i am trying to decode the following facility information element. I could decode the part from 80,
0e-length of the caller name.
52 4f 54 48 4d 45 49 45 52 20 50 45 54 45 - represent the caller name,
but what are the bytes before that ie
9f 8b 01 00 a1 17 02 02 06 24 02 01 00

08 --> Protocol Discriminator = q931
02 06 27 --> Call Reference = 1575, Origination Side
62 --> Message type = Facility
1c 1d --> Facility
9f 8b 01 00 a1 17 02 02 06 24 02 01 00 80 0e 52
4f 54 48 4d 45 49 45 52 20 50 45 54 45

i could not find the service discriminator which corresponds to 9f.
Thanks.
 
Do a web search on "System 930 E1 Version Reference Document". The coding is on page 12 of the document.
 
Please can somebody advise on E1/PRI d channel? Reference says it uses timeslot 16, but in a card that provides 31 channel, what is the position of the d channel. Is it 16 or 31?

Thank in advance

Richard
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top