Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISDN-PRI (Avaya to Aspect) no ANI

Status
Not open for further replies.

simreal

Technical User
Jun 13, 2006
714
US
I posted this in the Avaya forum as well.

I have an ISDN-PRI trunk between my Avaya S8700 3.1.2 and an Aspect. When I call from the aspect to the avaya I see ANI info but when I call from the Avaya to the Aspect I get no ANI.

Anyone have any idea what I might be missing?

Here is the trunk config on the Avaya side:

Page 1
Code:
            Voice System name: S8700 - Norcross.. - TRUNK GROUP                 
                                                                                
Group Number: 47                   Group Type: isdn          CDR Reports: y     
  Group Name: Tie to Aspect EAST          COR: 95       TN: 3        TAC: #47   
   Direction: two-way        Outgoing Display? y         Carrier Medium: PRI/BRI
 Dial Access? y                Busy Threshold: 255       Night Service:         
Queue Length: 0                                                                 
Service Type: tie                   Auth Code? n            TestCall ITC: rest  
                         Far End Test Line No:                                  
TestCall BCC: 4

Page 2
Code:
      Group Type: isdn                                                          
                                                                                
TRUNK PARAMETERS                                                                
         Codeset to Send Display: 6     Codeset to Send National IEs: 6         
        Max Message Size to Send: 260   Charge Advice: none                     
  Supplementary Service Protocol: a     Digit Handling (in/out): enbloc/enbloc  
                                                                                
            Trunk Hunt: cyclical                     QSIG Value-Added? n        
                                                   Digital Loss Group: 13       
Incoming Calling Number - Delete:     Insert:                 Format: unk-unk   
              Bit Rate: 1200         Synchronization: async    Duplex: full     
 Disconnect Supervision - In? y  Out? n                                         
 Answer Supervision Timeout: 0

Page 3
Code:
TRUNK FEATURES                                                                  
          ACA Assignment? n            Measured: both      Wideband Support? n  
                                 Internal Alert? n        Maintenance Tests? y  
                               Data Restriction? n     NCA-TSC Trunk Member:    
                                      Send Name: n      Send Calling Number: y  
            Used for DCS? n                            Send EMU Visitor CPN? n  
   Suppress # Outpulsing? n    Format: unknown                                  
 Outgoing Channel ID Encoding: preferred     UUI IE Treatment: service-provider 
                                                                                
                                                 Replace Restricted Numbers? n  
                                                Replace Unavailable Numbers? n  
                                                      Send Connected Number: y  
Network Call Redirection: none                    Hold/Unhold Notifications? n  
             Send UUI IE? n                    Modify Tandem Calling Number? y  
               Send UCID? n                                                     
 Send Codeset 6/7 LAI IE? n                         Ds1 Echo Cancellation? n    
                                                                                
    Apply Local Ringback? n               US NI Delayed Calling Name Update? n  
                                                                                
                             Network (Japan) Needs Connect Before Disconnect? n
 
Well .. I put this in the wrong forum.

Excuse my mistake.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top