ISDN Point to Point from German DTAG to Connect to CM3.1 BRI TN556D

[oOoFrancoOo]

Hi Guys,

we got 4 TNs and a 100 Number Range from the German DTAG. These 4 ISDN TNs are connected to the already working BRi Board TN556D.

I added 4 Ports to the BRI Configuration (9 - 12) with the following setup and created a TG with the Ports of the BRI Inside.
But the Trunk is not coming up. It says all the time OOS-NE.

Did i miss anything or will this card not work with this Type of ISDN?

display bri-trunk-board 02e04 Page 1 of 2
ISDN-BRI TRUNK CIRCUIT PACK

Location: 02E04 Name: ISDN
Interface Companding: a-law DCP/Analog Bearer Capability: 3.1kHz


Port Interface Side Cntry/Peer TEI
Protocol
1: network etsi auto
2: network etsi auto
3: network etsi auto
4: network etsi auto
5: network etsi auto
6: network etsi auto
7: network etsi auto
8: network etsi auto
9: network etsi auto
10: network etsi 0
11: network etsi 0
12: network etsi 0

display bri-trunk-board 02e04 Page 2 of 2
ISDN-BRI TRUNK CIRCUIT PACK

Port Interwork XID Endpt SPID Endpt Max
Message Test? Init? ID NCA TSC
1: PROGress n n 0
2: PROGress n n 0
3: PROGress n n 0
4: PROGress n n 0
5: PROGress n n 0
6: PROGress n n 0
7: PROGress n n 0
8: PROGress n n 0
9: PROGress n y 11306000 0
10: PROGress n y 11306001 0
11: PROGress n y 11306002 0
12: PROGress n y 11306003 0


display trunk-group 26 Page 5 of 21
TRUNK GROUP
Administered Members (min/max): 1/8
GROUP MEMBER ASSIGNMENTS Total Administered Members: 8

Port Code Sfx Name Night Sig Grp
1: 02E0409 TN556 D
2: 02E0425 TN556 D
3: 02E0410 TN556 D
4: 02E0426 TN556 D
5: 02E0411 TN556 D
6: 02E0427 TN556 D
7: 02E0412 TN556 D
8: 02E0428 TN556 D

Many thanks in Advance.
Franco