ISDN line state is blocked in BC8

[wfhy]

Hello frends,
I have a system BC8. ISDN TLU76/1 incoming is inited as follows:

ROCAP:ROU=29;
ROU SEL TRM SERV TRAF SIG
29 011000000000 5 2100000001 00151515 211100000030

<RODAP:ROU=29;
ROUTE DATA

ROU TYPE VARC VARI VARO FILTER
29 SL60 H'00000310 H'15400000 H'06410000 NO

When SUSIP is used, most of TRU line state in TLU76/1 is blocked but traffic state is OK. After BLDBE, everything is
OK. Maybe someday TRU line state returns blocked.

How can I do it?

 

[whosrdaddy]

maybe you're missing call collision patch.

paste printout of this command :

PCLOP:UNIT=SLP60,CI=S64001A;


cheers

--------------------------------------
What You See Is What You Get

 

[fcpli]

Daddy!
I think this patch is only in Belgium AS. It was even replaced by 76455, but only NOK-CI. The fault described here can't be fixed with this corr.. If the IE buffers are hanging, the timeslot itself wouldn't show "blocked", am I right?

wfhy: Sorry, more information needed to fix this one.....

 

[whosrdaddy]

fcpli, you're correct, it's belgian AS. but if my mind serves me correctly, the trunks showed blocked in susip...

wfhy, is this route also used for outgoing traffic?

please give following printouts :

rodap:rou=x;
rocap:rou=x;
roedp:rou=x,tru=all;

and also roddp:dest=y; for the specified rou x



--------------------------------------
What You See Is What You Get

 

[wfhy]

All frends,

Thank your response. The MD110 system data is as follows:

ROCAP:ROU=ALL;
ROUTE CATEGORY DATA

ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
28 011000000000 5 2100000001 0 30 128 00151515 211100000030 00110
29 011000000000 5 2100000001 0 30 128 00151515 211100000030 00110

RODAP:ROU=ALL;

ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
28 SL60 H'00000310 H'15400000 H'06410000 NO
29 SL60 H'00000310 H'15400000 H'06410000 NO

END

<RODDPEST=ALL;
EXTERNAL DESTINATION ROUTE DATA

DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE

7 28 0005000100000250 0 3
29 1 0005000100000250 0 3 0

END





wfhy

 

[dt2000]

HI,
Try new RODAI parameters :

ROU TYPE VARC VARI VARO FILTER
28 SL60 H'00000200 H'10000000 H'04410000 NO

It's for DSS1 sig . MD <-> PTT.
For Q-sig (tie line)we use your RODAI settings.