ISDN INCOMING

[hardian]

Hi guys, currently route 10 is outgoing isdn (tlu76/1 pri) trunks, i have been requested incase To be able to make these as incoming lines as well ringing directly to predefined extensions.
example:
route 10 tru 001-1 to ring extn 2910
route 10 tru 001-2 to ring extn 2910
.
.
.
route 10 tru 001-29 to ring extn 2910
route 10 tru 001-30 to ring extn 2910

tHANKS

 

[dstrang1]

You will at least need to use the RODNI command
RODNI: Rou=, tru=, day=, nig=;

If your telco is sending any digits, you will likely need to use NUTRI commands either in addition to, or instead of the RODNI commands.

You also need to make sure the route is configured to allow incoming traffic.

Good luck,

Dave Strang

 

[patcher]

ISDN contain informations and not ring-in signalling. This means RODNI is not the right choice. PRI needs NUTRI data to be able to reroute the call to a certain extension. If digits received are identical to your extension, you don't need NUTRI programming.