Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISDN E1 Trunk on EX Controller

Status
Not open for further replies.

danramirez

Programmer
Oct 25, 2009
1,136
ES
MiVB 9 - EX Controller

Hi Gents,

How do I configure ISDN Trunks on the new EX Controller? I've don it so many times with the MXe and CX but first time with the EX.

I have not found much documentation on how to do this.

please let me know, Regards,

daniel


 
You need this card - 50008233 one Port PRI T1/E1. EX supports up to 8 of these cards. See page 36 of the EX I&A guide for configuring the trunk(s).
 
from memory you have to use a particular slot as well

If I never did anything I'd never done before , I'd never do anything.....

 
Install all PRI card(s) first, sequentially starting from slot 1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top