ISDN E1 PRI issue with a Cisco 3640

[networker]

Hi all,

I have a 3640 router with a E1 PRI interface receiving ISDN calls from other routers.
However, I cannot establish calls from this router. Actually, the command 'isdn call' is unrecognized. The router is running Software C3640-I-M, Version 12.0(8).

I need your help to solve this problem.

Thank you in advance!

 

[eurobadger]

Hi

'isdn call' is ambiguous, could be 'isdn call interface' or 'isdn caller'.
Also these will not be recognised until you have configured the E1 controller.

Start with 'controller E1 <slot/port>' or
'controller E1 <number>' first in global configure mode.

Have a look at

http://www.cisco.com/en/US/products...ation_guide_chapter09186a0080087328.html#4736

and

http://www.cisco.com/en/US/products...eference_chapter09186a008007ffda.html#1052992

EB