ISDN-DSS1 in BC9

[NANSI]

I want to run ISDN-DSS1 towards a Cisco Call Manager in BC9, this shouldn´t be a problem. The problem is that my MD110 is not equipped with the correct software for ISDN. Can I transfer program-units from one BC9 to another and what units do I need for ISDN. Are the programs connected to the IPA-code in BC9? In that case I´m toast.
Any Ideas??!

 

[whosrdaddy]

IPA code is not used in BC9,
you can do an INL dump (DUSII) on another BC9 system and then transfer the units to your system. this system should be in the same CNI status.
these are the units you must copy. do first cnpip:unit=xx; to see which units aren't loaded
/* ISDN */
TLP60;
SLP60;
ADEP;
/* DSS1 Network Side */
DSSP;

to activate the units :

LAPUL:UNIT=XX,LIM=1; (do this for ALL lims)
SFCEI;
Y;
SFPUI:UNIT=xx,lIM=1; (do this for ALL lims)

that should do the trick

greetings,

http://www.damovo.com