I have 2 E1's bioth with 30n channels. 1 is connected to the PSTN the other a PRI card on a CISCO router.<which connects to a RAS server.
Both trunks are in service.
If I call the RAS server number from an Analogue line/modem it works fine with no problems I get a login from the ras server.
So from this I deduce that routing is good the trunks must be working OK.
However if I call from an ISDN line/modem I can see the connected call on the trunks but I get no connection to the RAS server like I do with an analogue modem.
I thought it may be a problem with my route pattern but they are set to unres and I have also tried to set them to both......
What could it be that is causing the isdn not to work ?
Both trunks are in service.
If I call the RAS server number from an Analogue line/modem it works fine with no problems I get a login from the ras server.
So from this I deduce that routing is good the trunks must be working OK.
However if I call from an ISDN line/modem I can see the connected call on the trunks but I get no connection to the RAS server like I do with an analogue modem.
I thought it may be a problem with my route pattern but they are set to unres and I have also tried to set them to both......
What could it be that is causing the isdn not to work ?