Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISDN BRI Configuration

Status
Not open for further replies.
gseide

gseide

IS-IT--Management
Feb 16, 2011
2
US
Hello, i just purchased a Madge Intelligent Switch and have configured 2 ports with SPID info... i made through layers 1 and 2 but stuck on the network layer...google searches are pointing to the incorrect number dialed... i am a CCVP and CCSP but dont have much experience with ISDN please help... heres the config and TS outputs


version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname r1
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
ip subnet-zero
ip cef
!
isdn switch-type basic-dms100
!
username r4 password 0 cisco
!
interface Loopback0
ip address 11.1.1.1 255.255.255.0
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.224
duplex auto
speed auto
!
interface BRI0/0
description To ISND SLOT 3 Port 1
ip address 1.0.0.2 255.0.0.0
encapsulation ppp
no ip route-cache cef
no ip route-cache
no ip mroute-cache
dialer idle-timeout 75
dialer wait-for-carrier-time 60
dialer map ip 1.0.0.1 name r4 2125554001
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 2125551001
isdn spid2 2125551002
isdn T310 5000
ppp authentication chap
!
interface Serial0/0
no ip address
encapsulation frame-relay
no fair-queue
!
interface Serial0/0.1 point-to-point
ip address 10.1.1.1 255.255.255.0
ip ospf priority 255
frame-relay interface-dlci 102
!
interface Serial0/0.2 multipoint
ip address 10.2.2.1 255.255.255.0
ip ospf priority 255
frame-relay map ip 10.2.2.3 103 broadcast
frame-relay map ip 10.2.2.4 104 broadcast
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
router eigrp 1
redistribute ospf 10 metric 1 15 15 15 15
network 192.168.1.0
auto-summary
!
router ospf 10
log-adjacency-changes
redistribute eigrp 1 metric 100000 subnets tag 10
redistribute eigrp 10
network 10.1.1.0 0.0.0.255 area 0
network 10.2.2.0 0.0.0.255 area 0
neighbor 10.2.2.3
neighbor 10.2.2.4
!
ip http server
ip classless
!
dialer-list 1 protocol ip permit
route-map EIGRP2OSPF permit 10
match tag 10
match route-type internal
!
line con 0
line aux 0
line vty 0 4
password cisco
login
!
end


r1#sho isdn stat
Global ISDN Switchtype = basic-dms100
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI 64, ces = 1, state = 8(established)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 1, tid = 0
TEI 65, ces = 2, state = 8(established)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 0
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0

r1#deb isdn q921
debug isdn q921 is ON.

*Mar 4 18:25:19.313: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:25:19.333: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar 4 18:25:23.637: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar 4 18:25:23.657: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar 4 18:25:29.333: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:25:29.353: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar 4 18:25:33.657: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar 4 18:25:33.677: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar 4 18:25:34.121: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=64
*Mar 4 18:25:34.125: ISDN BR0/0 Q921: User TX -> IDCKRP ri=43711 ai=64
*Mar 4 18:25:34.161: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=65
*Mar 4 18:25:34.165: ISDN BR0/0 Q921: User TX -> IDCKRP ri=22192 ai=65o
*Mar 4 18:25:35.117: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=64
*Mar 4 18:25:35.121: ISDN BR0/0 Q921: User TX -> IDCKRP ri=49585 ai=64
*Mar 4 18:25:35.157: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=65
*Mar 4 18:25:35.161: ISDN BR0/0 Q921: User TX -> IDCKRP ri=56514 ai=65int
*Mar 4 18:25:39.357: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:25:39.377: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0bri0/0

BRI0/0 is up, line protocol is up (spoofing)
description To ISND SLOT 3 Port 1
Hardware is PQUICC BRI
Description: port 5
Internet address is 1.0.0.2/8
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
Last input 00:00:03, output never, output hang never
Last clearing of "show interface" counters 3d08h
Input queue: 0/75/1/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 48 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
39974 packets input, 183407 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
39966 packets output, 184476 bytes, 0 underruns
0 output errors, 0 collisions, 62 interface resets

*Mar 4 18:25:43.677: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar 4 18:25:43.697: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar 4 18:25:49.377: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:25:49.397: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0.
*Mar 4 18:25:53.697: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar 4 18:25:53.717: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar 4 18:25:59.397: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:25:59.417: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar 4 18:26:03.721: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar 4 18:26:03.741: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18

ping 1.0.0.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.0.0.1, timeout is 2 seconds:
Success rate is 0 percent (0/5)
r1#isdn test call int bri0/0:1 4001
r1#isdn test call int bri0/0:1 4001
*Mar 4 18:28:01.873: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=34 nr=51
*Mar 4 18:28:01.909: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=35
*Mar 4 18:28:01.933: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=51 nr=35
*Mar 4 18:28:01.937: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=52
*Mar 4 18:28:01.961: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=52 nr=35
*Mar 4 18:28:01.965: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=53
*Mar 4 18:28:01.973: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=35 nr=53
*Mar 4 18:28:02.005: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=36
*Mar 4 18:28:02.029: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=53 nr=36
*Mar 4 18:28:02.029: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=54

r1#deb isdn q931
isdn test call int bri0/0:1 4001

*Mar 4 18:28:09.605: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=36 nr=54
*Mar 4 18:28:09.609: ISDN BR0/0 Q931: SETUP pd = 8 callref = 0x62
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Called Party Number i = 0x80, '4001'

Plan:Unknown, Type:Unknown

*Mar 4 18:28:09.645: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=37
*Mar 4 18:28:09.665: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:28:09.669: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=54 nr=37
*Mar 4 18:28:09.669: ISDN BR0/0 Q931: CALL_PROC pd = 8 callref = 0xE2
Channel ID i = 0x89
*Mar 4 18:28:09.673: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=55
*Mar 4 18:28:09.697: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar 4 18:28:09.705: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=55 nr=37

*Mar 4 18:28:09.709: ISDN BR0/0 Q931: DISCONNECT pd = 8 callref = 0xE2

Cause i = 0x829C - Invalid number format (incomplete number)
*Mar 4 18:28:09.709: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=56
*Mar 4 18:28:09.717: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=37 nr=56
*Mar 4 18:28:09.717: ISDN BR0/0 Q931: RELEASE pd = 8 callref = 0x62
*Mar 4 18:28:09.749: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=38
*Mar 4 18:28:09.761: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=56 nr=38
*Mar 4 18:28:09.761: ISDN BR0/0 Q931: RELEASE_COMP pd = 8 callref = 0xE2
*Mar 4 18:28:09.765: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=57
*Mar 4 18:28:19.697: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar 4 18:28:19.717: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar 4 18:28:19.765: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=57
*Mar 4 18:28:19.789: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=38


User Access Verification

Current configuration : 1314 bytes
!

Router 2

version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname r4
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
memory-size iomem 10
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
no ip domain lookup
!
multilink bundle-name authenticated
!
isdn switch-type basic-dms100
!
!
username r1 password 0 cisco
archive
log config
hidekeys
!
interface FastEthernet0/0
ip address 192.168.4.4 255.255.255.224
duplex auto
speed auto
!
interface Serial0/0
ip address 10.2.2.4 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.2.2.1 401 broadcast
!
interface BRI0/0
ip address 1.0.0.1 255.0.0.0
encapsulation ppp
dialer idle-timeout 75
dialer map ip 1.0.0.2 name r1 2125551001
dialer-group 1
isdn switch-type basic-dms100
isdn timer T310 5000 4001
isdn spid1 2125554001
isdn spid2 2125554002
ppp authentication chap
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
!
r4#
 
Sort by date Sort by votes
int bri0/0
dialer-list 1 protocol IP permit

can't get L3 w/o IP...:)

Burt is Hurt

Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(25c), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1523-2010 by Cisco Systems, Inc.
Compiled Thu 11-Feb-1539 23:02 by ßµ®†Šß€€Š

ROM: System Bootstrap, Version 12.2(7r) [ÝØÝØMØÑ], RELEASE SOFTWARE (fc1)

Edge uptime is 469¼
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

tdmneil
  • Locked
  • Question
Using a 1760 or a 2811 as a UK E1 PRI (ISDN30) Simulator...
Replies
0
Views
52
tdmneil
tdmneil
namesrhard2pick
  • Locked
  • Question
ISDN Simulator
Replies
2
Views
56
CiscoGuy33
CiscoGuy33
silverhairb
  • Locked
  • Question
Configuration register for tftp boot 4
Replies
16
Views
164
silverhairb
silverhairb
NahRamp2
  • Locked
  • Question
ISDN configuration questions
Replies
6
Views
82
Gharus
Gharus
ltw500
  • Locked
  • Question
Question re: ISDN on CCNA
Replies
2
Views
58
CiscoGuy33
CiscoGuy33

Part and Inventory Search

Sponsor

Back
Top