ISAKMP Identity Address

[southside]

Hi All,

I hav econfigured for a VPN Connection on a Pix 506E. This Pix sits within a Network so traffic is Nat'd out to a Public IP address and Internet. When I try to establish a VPN the ISAKMP Phase 1 is rejected because the Peer is set to the local PIX Outside IP address rather than the Public IP Address. The remote end is expecting the public IP address as the Peer.

Is there anyway to set the Local Peer address to transmit as the Public IP Address ie. Instead of the local Peer 192.168.9.2 (Outside interface IP) being sent as the Local Peer, I want something like 66.66.66.66 to be identified as the local peer address.

Regards

Adrian

 

[DanInRaleigh]

southside,
..is there anyway you can post the failing config to get a better understanding of what you are talking about..

..thanx

http://www.daniel-white.com