Is there a way to reboot/ initiate cs1000e and cs1000m 2

[LittleMaster]

Hello all
Can we reboot/ initiate our cs1000e and cs1000m through commands in any LD ?

 

[janaya]

yes. Depends on the release, but you can

LD 135

.sysload active/inactive
.ini active/inactive

depends if you are HA, or Single mode.

then confirm by typing yes when it asks.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

 

[Firebird Scrambler]

The older CS1000 (Option 11c) systems could be rebooted in LD 143 using the command XSL. I can't give out the password but it's a good un!. However, I tend to do it via "pdt" using the command "reboot -1"


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[LittleMaster]

Thank you John Amaya....it is working on my 61c and 81c....
And thanks to firebird scrambler ...it worked well on 11c

 

[monkey101]

you can also do it through element manager as well