Is it possible to send digits aft

[xippeo005]

Is it possible to send digits after choose a abbreviated dialing number.

Example: abb=91400,tra=0{outside number} [tone sender on] [wait][wait],[digits xxxx]

The problem is that i have option a to e, but none of them wil wait and send all digits out.

Thank for helping me.

 

[lalrl]

Hallo,

It can not work, if you have ISDN on your public lines, because "Tone Sender" on means, the remote system expects DTMF. MD110 can not know it. I remember, 10 years ago we had analoge lines. All digits was dialled with DTMF. Thats why a "C" in the middle of the abb-number did help to make a break.

lalrl

 

[patcher]

Is there any answer after TRA(public number) that is why you will insert "tone sender on"??? Remember that there is no way to transmit programable digits after answer. The only way if you will like it, if you are using DTS phone with enough spare TNS keys; you can program public number in 1st key and the rest of the digits on the 2nd key. How this works, press the 1st digit. After answer then press # then press the 2nd key. This is the only way and we cannot program the whole digits in 1 key or abb, you can but the rest of the digits will not be transmitted after answer.
//patcher