Is it possible to access paging system remotely?

[stickybuttons]

Customer has MICS 6.0 with Flash 2.0 VM. Wants to be able to csll into system thru AA and access overhead paging system in plant. Anyone know if this is possible without adding additional paging equipment? Customer currently just has external page port on Norstar connected to several Valcom horn speakers. Thanks in advance.

 

[curlycord]

Not from AA*
Paging can be accessed using DISA which would answer a trunk
Read the Installer Guide on DISA.

* - You can use an ATA out and back into a spare Trunk port.
Therefore intercom the ATA from AA

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca