Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is C- Lan required?

Status
Not open for further replies.

jhillsmo

Technical User
Jun 23, 2006
21
US
We have a G3siv9 and an Intuity AUDIX as a DR system.
If I have no desire to use ASA and the IP network to access AUDIX is the C-Lan necessary? I pulled a Definity G3/Intuity config paper off AVAYA to use as a guideline. Am I going in the right direction? I can call AUDIX etc but I do not get personal greetings. The config sheet shows the analog ports as VMI type, not 2500. Is this pretty straight forward inband signalling?

Thanx
 
There are several Audix integrations with g3si
all require different hardware, RTU options, programming.

x.25
mode code
ethernet

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
 
If your audix ports show as "VMI", that is "mode-code", your digits are transfered as inband touch tones, you do not need a CLAN card for an audix link, in that case.


Mitch

AVAYA Certified Expert
 
They are currently 2500, i had planned on changing a couple of them to VMI per the document and givng it a whirl. I'm assuming that the cover path for the stations sends the call to the VMI hunt group, the message center, and that the digts are passed then delivering the primary greeting.

I need to keep digging the site to find a doc about thwe AUDIX link.

Thanx for the info.
 
if your audix ports are currently set to "2500", then you probably have CLAN integration, or if a very very old ancient switch, X25 serial integration. FYI.



Mitch

AVAYA Certified Expert
 
It's c-lan integration i'v come to that conclusion. i had thought the c-lan was only for asa functionality. i'm not getting info to the audix for proper mwessage delivery, or i should say subscriber specific recordings, be it an auto-attendant or station subscriber. i've got an 8700 across the street, i need to compare the configs on the two machines. i'm close...
 
display comm proc" will show you the audix link, and "status link 1" (usually your first administered CLAN) will show you if the link is up or down.



Mitch

AVAYA Certified Expert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top