IPX Routing not available 1

[Speaker]

I need to enable IPX routing between my head-end 3620 (IOS 12.2(2)T) and a remote office with a 1604 (IOS 12.0(8).

The global "ipx routing" command is not an option on either router. I would think that ipx routing would be standard, but is it possible that I am missing a module on these routers? If so, does anyone know off-hand which one(s)?

TIA,
Tim

 

[svermill]

If you have a CCO login, follow this link:

http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl?Introduction=True

I know that on lower end routers such as 1600 series, things like IPX are often only included in IP Plus version of IOS. I would be a little surprised if that were the case with your 3600 series, but it is certainly possible.

 

[wybnormal]

I agree... odds are high the version of IOS you have is IP only.. not as surprising as one might think. THe IOS code feature set is one place people try to scrimp a few bucks or if there was an upgrade, the improper IOS code was loaded.

MikeS
Find me at

http://www.packetattack.com

"The trouble with giving up civil rights is that you never get them back"