Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPSI Scenerio

Status
Not open for further replies.
tmgpbx

tmgpbx

Technical User
Apr 5, 2004
108
0
0
US
I have an S8710, Control Network A and B dual IPSI's in Port Network 1. G650's with IPSI's in A01 and B01 with static addresses. Running 3.1

System is up with no alarms, I can ping the IPSI's from the servers and I have even completed firmware upgrades. My problem is when I display system-par ipsi I get nothing in the IPSI Host Name Prefix, Primary Control and Secondary Control Subnet Addresses. My dup is enabled and all is working fine. I have seen that others have had this, but I haven't seen a solution. Any help?
 
Sort by date Sort by votes
Possibly because you are using static addressing, although I'm not sure.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

OCsurfer
  • Locked
  • Question
Need to reIP G650 with IPSI boards with Ip address going through firewall. Any potential issues? 2
Replies
10
Views
98
kyle555
kyle555
OCsurfer
  • Locked
  • Question
How does a IPSI board work in a G650? How do they connect to the main processor? 3
Replies
5
Views
53
DAVIDPAYNE
DAVIDPAYNE
noside12000
  • Locked
  • Question
Reseating IPSI Board
Replies
5
Views
63
AvayaTier3
AvayaTier3
saar20
  • Locked
  • Question
IPSI is N/A
Replies
1
Views
18
kyle555
kyle555
skk391
  • Locked
  • Question
Avaya CLAN , IPSI and RTP forwarding understanding
Replies
1
Views
17
DAVIDPAYNE
DAVIDPAYNE

Part and Inventory Search

Sponsor

Back
Top