Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPsec

Status
Not open for further replies.

lordrich

IS-IT--Management
Jul 7, 2003
22
GB
I have IPsec setup between windows 2000 server and watchguard firebox. Ipsecmon reports it is connected and is recieving packets, but isn't allowing packets out. Tracerouting the remote network from windows 2000 goes three hops out onto the internet and then fails. Tracerouting the external ip address of the remote network still works. ISA server has been setup to allow all traffic to the remote network and to allow port 500 udp both in and out. I am getting lines appearing in ippextd20040527 such as:

2004-05-27 14:06:49 212.69.246.133 192.168.1.0 Udp 1029 137 BLOCKED 212.69.246.133

What do I need to do to get this working properly?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top