Ipsec tunneling between 2 IPO's

[LRB45]

Can anyone point me to some documentation on configuring an IPsec tunnel?
I've searched the knowledge base and can't seem to find it?

On another note has anyone gotten a vpn client phone to work with a RV042 router? I saw in this 940-1257607 where someone got it to work but I can't seem to figure it out

 

[intrigrant]

1 :

http://marketingtools.avaya.com/knowledgebase/ipoffice/mergedProjects/manager/tunnel_settings.htm

2 : I don't want to dissappoint you but the RV042 router does not work:

http://www.tek-tips.com/viewthread.cfm?qid=1550253&page=1

http://www.tek-tips.com/viewthread.cfm?qid=1517333&page=1

http://www.avayausers.com/showthread.php?p=52121

If you manage to get it working please let me know, i will give you one year a star for every post on Tek-Tips

 

[IPOfficeIreland]

why would you want to set up an ipsec tunnel between 2 ipo's anyway? can you imagine the amount of reboots you would need? Put in 2 cheap routers and you get a better service.

 

[amriddle01]

I'm with TheTaker on this one, even Avaya recommend against sending voice over an IP Office generated VPN never mind running your network/SCN over it.

ACS - IP Office Implement

"I'm just off to Hartlepool to buy some exploding trousers

 

[LRB45]

The tunneling was more of an experimental/ boredom thing as I have a couple of spare IPO's laying around. I had seen the knowledgebase article but thought maybe there was a bit more info on it somewhere else hiding out. At his point I don't I'll even mess with it.

I had given up on the RV042 plan a long time ago but then came across this thread

http://www.tek-tips.com/viewthread.cfm?qid=1257607&page=1

the other day and gave it another try.. If it does work as janni78 says I surely can't figure it out and apparently am not alone.

Thanks for the input guys.