ipsec site to site vpn routing problem

[handle2110]

Hello I have a problem with ip-sec lan to lan tunnel


Location A ASA5505 192.168.100.0/24
Location B ASA5510 192.168.58.0/24

I created a ipsec site to site vpn Also create the nat exempt rule

Now i have also a second interface on Location B with subnet 192.168.100.0/24
Now can i access from location a the devices on location b

But when i wil connect from location b to location a i get no connection i think that the asa the traffic not send over the ipsec tunnel but it keeps in the asa

 

[unclerico]

Take a look at this:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtml

If you still need help after reading about it, then post back and we'll help.

 

[handle2110]

I don't understand the command's i created a network diagram with the subnets and what i want maybe you can help me.

 

[unclerico]

what version of code are you running?

 

[hairlessupportmonkey]

you have to add the all networks you wish to access / encrypt into the ACL for the VPN tunnel

ACSS - SME
General Geek