Hello everyone...
I've got a question about a log notification that just started popping up on a Sonicwall 2040 that I manage.
(IPSEC Replay Detected)
Setup: Main office has 2040, 9 remote offices all have Site to Site VPN tunnels using either SOHO3's or TZ-170's.
1 remote office is using a Global VPN client (it's a temporary location). This particular site is using a Sprint Air card for internet access, and this is where the problem is rearing it's ugly head.
I'm getting bunches of "IPSEC Replay Detected" messages in the log recently. Everything had been running fine up until this point, and no changes had been made.
It's only happening on the Global VPN client, the client is the latest (3.1.0.556) and I just updated the firmware on the Pro 2040 at the main office to 3.1.0.15-95s (Standard OS).
Like I said, I updated the firmware, but I also disabled Dead Peer Detection and had no luck solving this.
Does anyone have any idea how to fix this?
Thanks!
Mike
I've got a question about a log notification that just started popping up on a Sonicwall 2040 that I manage.
(IPSEC Replay Detected)
Setup: Main office has 2040, 9 remote offices all have Site to Site VPN tunnels using either SOHO3's or TZ-170's.
1 remote office is using a Global VPN client (it's a temporary location). This particular site is using a Sprint Air card for internet access, and this is where the problem is rearing it's ugly head.
I'm getting bunches of "IPSEC Replay Detected" messages in the log recently. Everything had been running fine up until this point, and no changes had been made.
It's only happening on the Global VPN client, the client is the latest (3.1.0.556) and I just updated the firmware on the Pro 2040 at the main office to 3.1.0.15-95s (Standard OS).
Like I said, I updated the firmware, but I also disabled Dead Peer Detection and had no luck solving this.
Does anyone have any idea how to fix this?
Thanks!
Mike