I am working with a site that has a pix firewall (waiting on model number from the site), and am attempting to establish a VPN connection from a Netscreen NS5xt behind the PIX to an NS500 at my home office.
He is NATing a public ip to an internal ip for the NS5xt.
Currently the tunnel is being torn down every 1.5 to 2 minutes and phase 2 rebuilt.
The two Netscreens use digital certs and the devices are configured the same as two other non related sites using the same implementation.
I beleive we just have not hit the correct item on the PIX to allow ipsec passthrough.
Can anyone provide the configuration needed to configure the PIX for ipsec passthrough?
Thanks
Darin
He is NATing a public ip to an internal ip for the NS5xt.
Currently the tunnel is being torn down every 1.5 to 2 minutes and phase 2 rebuilt.
The two Netscreens use digital certs and the devices are configured the same as two other non related sites using the same implementation.
I beleive we just have not hit the correct item on the PIX to allow ipsec passthrough.
Can anyone provide the configuration needed to configure the PIX for ipsec passthrough?
Thanks
Darin