Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPOffice to Nortel Meridian

Status
Not open for further replies.

cgates

Technical User
Sep 13, 2005
10
GB
I have 2 Meridians using an ip network (ITG trunk)between them plus various sub sites, we are looking to connect an IPOffice to this network?Can we connect using IP or is it PRI working with QSIG/Q931?dpnss. Can anyone point me in the right direction?
 
I do remember reading a document regarding the testing of using a PRI to connect a 412 to an option 11. Had a few hiccups, but if I remember correctly, it worked.
 
It should work using QSIG at least if that's an option on the Meridian.
 
Connected a 406 to a Meridian with QSIG - no problem! Just make sure you match the number of channels with the Meridian...that caused me a right headache!
 
Also got this with QSIG going no problem, but watch the versions, we had issues prior to 3.2 with reboots caused by calls to Voicemail from Meridian. Cuurently OK in 3.2.53
 
Also not only with Qsig.we tried it with Euro Etsi at Meridian and Qsiq a at Ip Office and it works without any problems.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top