Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPOffice pulse dialing
- Thread starter auskar85
- Start date
It doesn't. There are some ATAs available that support pulse dialing phones and 'translate' the received digits as enbloc dial string to IPO. But you will have to pay for the ATA and for the third party IP Endpoint Licenses and if you don't have some you must purchase VCM channels.
holdmusic34
Vendor
Line | Analog Options>
Signaling Type Default = DTMF Dialing
Sets the signaling method used on the line. The options are:
DTMF Dialing
Pulse Dialing
But only the lines.
It doesn't get much worse.
Signaling Type Default = DTMF Dialing
Sets the signaling method used on the line. The options are:
DTMF Dialing
Pulse Dialing
But only the lines.
It doesn't get much worse.
TouchToneTommy
Vendor
- Status