Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPOffice Can't Call Out From Bridged-Appearance of other station

Status
Not open for further replies.

AvayaCiscoAdmin

Technical User
Dec 6, 2012
51
CA
We have 5 stations: 22221, 22222, 22223, 22224, and 22225

Stations 22222, 22223, 22224 and 22225 each have two bridged non-ringing appearances of 22221 configured.

None of the four stations can call out ( 9 + area code, or internal 5 digits) when selecting either of the two the bridged-appearance buttons of 22221.
Is that normal operation?

I can not find anything under User programming or User Rights that allows or disallows out calling from a bridged-appearance.

 
Strange, that should work and I've tried it before without any issue....

Thanks, Tim
Adelaide, Australia
 
Obvious questions would be:

[ul]
[li]What happens/is seen on 22221 during these attempts?[/li]
[li]Do the numbers dial correctly from 22221?[/li]
[li]What happens when dialed from any normal Call Appearance on those phones? (they still must have call appearances)[/li]
[/ul]


Stuck in a never ending cycle of file copying.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top